430 Series
NOTE: If the DSTN screen flickers with an LCD Display Colors
setting of 222K Colors, select 4096 Colors.
(e) Power On Display
This option is used to select the display when booting up.
Internal/External Selects an external CRT if one is connected, other-
wise it selects the internal LCD. (Default)
Simultaneous Selects both the internal LCD and the external CRT
for simultaneous display.
NOTE: When starting the computer in Resume mode, the last configu-
ration is remembered. If data does not appear on the display you are
using after starting in Resume mode, press Fn+F5.
Pressing Fn+F5 changes the display setting as follows: internal LCD
to simultaneous to external CRT.
(f) Text Mode Stretch
Text mode stretch enables a larger display area of 800 x 600 pixels in text
mode. Disabling this function reduces the resolution to the standard 800 x
600 pixels.
Enabled Enables the text mode stretch feature.
(Default)
Disabled Disables the text mode stretch feature.
3. Hard Disk
Use this item to select the hard disk mode.
Enhanced IDE Select this mode when using MS-DOS,
(Normal) Windows or OS/2. (Default)
Standard IDE Select this mode when using Novell NetWare or
UNIX. When this mode is selected, up to 504MB is
logically available even though the disk’s capacity
is larger than 504MB.
To Next Page
Loading...
