Toshiba 4400 Series - Product Use and Safety; Qualified Personnel

4400 Series Installation and Operation Manual – 64527-008
Product Use and Warranty Restrictions
The Toshiba products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, o󰀩ce equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These Toshiba products
are neither intended nor warranted for usage in certain applications outlined in Section 1.4 Unintended Usage.
NOTICE
PLEASE INFORM TOSHIBA INTERNATIONAL CORPORATION OR AUTHORIZED REPRESENTATIVE IN
CASE OF INCONSISTENCIES, OMISSIONS, OR QUESTIONS.
Contact us at: TIC-UPS-AppEngr@toshiba.com or visit us at:
www.toshiba.com/tic/industrial/uninterruptible-power-systems
The instructions contained in this manual are not intended to cover all of the details or variations in equipment, or to provide
for every possible contingency concerning installation, operation, or maintenance. Should further information be required
or if problems arise which are not covered su󰀩ciently, contact your Toshiba sales o󰀩ce or call Toshiba Power Electronics
Division at 855-803-7087
Nothing in this manual shall alter Toshiba International Corporation’s standard terms and conditions or the
conditions of any written sales contract.
Any electrical or mechanical modications to the equipment discussed herein, without prior written consent of Toshiba
International Corporation, will void all warranties and may void the UL/CUL/CE/ETL listing. Unauthorized modications can
also result in personal injury, loss of life, or destruction of the equipment.
QUALIFIED PERSONNEL ONLY
Only qualied persons are to install, operate, or service this equipment according to all applicable codes and
established safety practices. The denition of Qualied Personnel is detailed in Section 2.3