80
4400 Series Installation and Operation Manual – 64527-008
(Quick Access Toolbar Buttons)
ADM – Security Mode: USR and ADM
BUZZER ON – Toggles between BUZZER ON, BUZZER OFF
TOUCH ON – Toggles between enabling and disabling the touchscreen.
Q. VIEW ON – Toggles between Quick View and standard view (Q. VIEW OFF)
12.9 4400 Menu Tree
Below is a menu tree for the 4400 display.
• Quick Access Toolbar buttons allow immediate control of important functions.
• Menu Tabs allow access to varying degrees of detailed information concerning the UPS operation,
performance and parameters. The degree of information available is determined by the Security
mode, which can be changed pressing the top Quick Access Toolbar button and entering the ap-
propriate password.
FIGURE 12.7: MENU TREE
(Tab Buttons)
MAIN
MONITOR INPUT
DC
BYP
OUTPUT
BATT
ID
CTL&CFG
HIST
DSP&EX
SETUP ID INPUT OUTPUT BYP
BATTDC CTL&CFG HIST
DSP&EX DBG SPE
RECORD FAULT/WARNING
OPERATION
(TAB Selection Buttons)
HELP
FAULT
WARNING
STATUS
RUN STOP
To Next Page
Loading...
Need help?
General