How to fix NO PAPER error on Toshiba B-EP2?
If your Toshiba Barcode Reader shows a 'NO PAPER' error, it could be due to a few reasons: the media has run out, it's not loaded correctly, the sensor position needs adjustment, the sensor isn't calibrated, or the media is slack. First, load new media or reload it correctly, and then press the [RESTART] key. If that doesn't work, adjust the sensor position and take up any slack in the media.
What does SYNTAX ERROR mean on Toshiba B-EP2 Barcode Reader?
A 'SYNTAX ERROR' on your Toshiba Barcode Reader means that while the printer is in Download mode for upgrading the firmware, it received an improper command. Turn the printer off, and then on again.
What causes RIBBON ERROR on Toshiba Barcode Reader?
A 'RIBBON ERROR' on your Toshiba Barcode Reader can occur if the ribbon is not fed or loaded properly, or if the ribbon sensor has a problem. Remove the ribbon and check its status, replacing it if necessary. If the problem persists, turn off the printer and contact an authorized service representative.
General| Brand | Toshiba |
|---|---|
| Model | B-EP2 |
| Category | Barcode Reader |
| Language | English |
To Next Page