Toshiba B-EP4DL-GH20-QM-R - Page 410

CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP Series
6-29
c When one field width < specified character string width
(Space between characters = 0, Specified character string digits = 6)
 Print image when the parameter setting is omitted.
A=Specified character string width – 1 field width=200 dots – 140 dots=60 dots
B=A/Data length=60 dots/4=15 dots
One character width=1 character width+B=35 dots+15 dots=50 dots
 Print image when the parameter setting is specified.
* When the number of print data is 6 digits or more, the condition of
ineffectiveness (3) is satisfied. In this case, the characters are printed in
normal width.
d When one field width < specified character string width
(Space between characters ≥ 0, Specified character string digits = 5)
 Print image when the parameter setting is omitted.
A=Specified character string width – 1 field width=200 dots – 155 dots=45 dots
B=A/Data length=45 dots/4≈11 dots
One character width=1 character width+B=35 dots+11 dots=46 dots
 Print image when the parameter setting is specified.
* When the number of print data is 5 digits or more, the condition of
ineffectiveness (3) is satisfied. In this case, the characters are printed in
normal width.
A B C D
One character width (35 dots)
Specified character string width (200 dots)
A B C D
1 field width
(
140 dots
)
A
Specified character string width (200 dots)
One character width (50 dots)
1 field width
(
155 dots
)
A
A B C D
One character width (35 dots)
Specified character string width (200 dots)
A B C D
Specified character string width (199 dots)
One character width (46 dots)
Space between characters (5 dots)
Space between characters (5 dots)