Toshiba B-EP4DL-GH20-QM-R - Page 412

CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP Series
6-31
f When one field width ≥ specified character string width
(Space between characters ≥ 0, Specified character string digits = 6)
 Print image when the parameter setting is omitted.
A=1 field width – Specified character string width=215 dots – 120 dots=95 dots
B=A/Data length=95 dots/4≈24 dots (rounded up)
One character width=1 character width – B=50 dots – 24 dots=26 dots
 Print image when the parameter setting is specified.
* When the number of print data is 6 digits or more, the condition of
ineffectiveness (3) is satisfied. In this case, the characters are printed in
normal width.
1 field width
(
215 dots
)
A
A B C D
One character width (26 dots)
Specified character string width (120 dots)
A B C D
Specified character string width (120 dots)
One character width (50dots)
Space be
tween characters (5 dots)
Space between characters (5 dots)