EO15-33001A
(Revision Date: Feb. 14, 2008)
TABLE OF CONTENTS
Page
1. Cutter Module------------------------------------------------------------------------------------------------------1- 1
1.1 B-SA204-QM/ B-SA204-QM-R ----------------------------------------------------------------------------1- 1
1.2 B-SA204P-QM-R----------------------------------------------------------------------------------------------1- 4
2. Strip Module--------------------------------------------------------------------------------------------------------2- 1
2.1 B-SA904-H-QM-R---------------------------------------------------------------------------------------------2- 1
2.2 B-SA904P-H-QM-R-------------------------------------------------------------------------------------------2- 5
3. Wireless LAN Module: B-SA704-WLAN-QM-------------------------------------------------------------3- 1
4. Serial Interface Board: B-SA704-RS-QM-R --------------------------------------------------------------4- 1
5. 300 dpi Print Head Kit: B-SA704-TPH3-QM-R-----------------------------------------------------------5- 1
6. Real Time Clock: B-SA704-RTC-QM-R --------------------------------------------------------------------6- 1
7. Expansion I/O Board: B-SA704-IO-QM-R-----------------------------------------------------------------7- 1
8. RFID Module: B-SA704-RFID-U2-EU-R --------------------------------------------------------------------8- 1
CAUTION!
1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA
TEC.
2. The contents of this manual may be changed without notification.
3. Please refer to your local Authorised Service representative with regard to any queries you
may have in this manual.
Copyright © 2005
by TOSHIBA TEC CORPORATION
To Next Page
Loading...
Need help?
General
