29 / 73
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved. http://www.toshiba-teli.co.jp/en/
GenCP
The following address is possible to access by GenCP only.
0x0001 0000(GenCP Ver.1.0)
User-programmable device identifier.
Returns the latched 64-bit value of the timestamp counter.
0x01: Latches the current timestamp counter into timestamp register.
Set baudrate.
0x0:auto recognition, 0x1:9600bps, 0x10:115200bps, 0x80:921600bps
* 0.4M : BC040M, 1.6M : BC160M
* For registers other than those mentioned above, please refer to the GenCP Standard Ver.1.0.
R/W :Read / Write possible
R.O. :Read Only
W.O. :Write Only
N.A. :Not available