Service Manual, 2017-8
11 / 51
3.5Change the door opening direction
1. Unplug your refrigerator and remove all food
from the door shelves.
2. Remove the left cover plate and the right top
hinge cover, then unscrew and remove the right
top hinge. Keep the screws to reuse. Disconnect
the connect signal wire between the door and box
body.
3. Lift the refrigerator door up and away from
your refrigerator.
4. Unscrew the two screws holding the center
hinge, remove the hinge, then lift the refrigerator
door up and away from your refrigerator. Save
the screws to reuse.
5. Unscrew the two screws holding the bottom
hinge, then remove the bottom hinge from the
bottom right side of the refrigerator.
6. Unscrew the hinge pin from the right side of
the bottom hinge and move it to the left side, then
secure the bottom hinge to the bottom left side of
the refrigerator, using the screws you removed
previously.
To Next Page
Loading...
Need help?
General
