Service Manual, 2017-8
32 / 51
Button
A.Refrigerating chamber temperature control
B.Freezing chamber temperature control
CVacation/lock button
Display screen
①Refrigerating chamber temperature dispiay
area
②Freezing chamber temperature dispiay area
③Power cool icon
④Power freez icon
⑤Vacation icon⑥Lock icon
9.2 Display
When power on the refrigerator for the 1st time, the whole display panel will shine for 3
seconds.then the display panel enters the normal display.The first time for using the refrigerator,
the default set temperatures of refrigerating chamber, freezing chamber is 5° C/-18 °C
respectively.
When the error occurs, the display panel shows the error code (see next page); during normal
running, the display panel shows the set temperature of refrigerating chamber, freezing
chamber.Under normal running, if there is no operation or opening door action within 30s, the
display panel will be locked,the light of display panel will go out after the locked state continued
for 30s.
9.3 Lock and unlock
In the unlocked state, continue to press the lock button for 3 seconds, enter the lock state,
The icon lights up and buzzer sounds, it means the display panel is locked, at this time, button
operation cannot be implemented;In the locked state, continue to press the lock button
for 3 seconds, enter the unlocked state, The icon go out and buzzer sounds, it means the display
To Next Page
Loading...
Need help?
General
