Toshiba D-RW2SU - Special Playback; Zoom; Marker Setup

89
Playback
Recording
Playback
EditingIntroduction Connections
Basic Setup
Function Setup Others
EN
Special playback
1) During playback, press [ZOOM].
Zoom menu will appear.
2) Using [K / L], select a desired zoom factor to
zoom. Press [ENTER].
<eg. DVD-Video>
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
The zoom area will be displayed.
3) Using [K / L / { / B], select a desired zoom
position. Press [ENTER].
The zoom play will start.
Notes
• When selecting a smaller factor than the current one, the
zoom area will not be displayed.
• To exit the zoom menu, press [ZOOM] again at step 1.
• To cancel the zoom function, select “x1.0” using [K / L],
then press [ENTER].
1.2
1.5
2.0
DVD-Video1 1 0:04:01
Marker Setup
This feature allows you to assign a specific point on a
disc to be called back later.
1) During playback, press [DISPLAY].
The Display menu will appear.
2) Using [{ / B], select . Press [ENTER].
Marker Setup menu will appear.
3) Using [K / L], select a desired marker number.
When it reaches the desired point, press
[ENTER].
<eg. DVD-Video>
The title (track) number and the time will be displayed.
4) To return to the marker later:
Using [K / L], select the desired marker
number. Press [ENTER].
Notes
• To clear a marker, select the marker number to be
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
– Turning off the power
– Recording to a recordable disc
– Changing the mode between Original and Playlist (VR
mode)
• You can mark up to 6 points.
DVD-Video
1 1 0:04:01
---
---
---
---
---
---
1
2
3
4
5
6
DVD-Video1 1 0:04:01
Zoom
PlaybackUD.indd89PlaybackUD.indd89 2006/01/1116:29:082006/01/1116:29:08