Toshiba D-RW2SU - Program Play; Slide Show

92
Playback
EN
Program Play
You can program the disc to play in your desired order.
1) Press [SETUP] in stop mode.
2) Using [K / L], select “CD Playback Mode”.
Press [ENTER].
CD Playback Mode menu will appear.
3) Using [K / L], select “Program Play”. Press
[ENTER].
Program Play list will appear.
4) Using [K / L], select a desired track. Press
[ENTER] or [B].
A cursor will move to next.
5) Press [PLAY B] to start program playback.
Program playback will start.
Notes
• To erase tracks you selected, press [CLEAR].
• You can make program settings up to 50.
• To cancel program play, press [STOP C] twice during
program play. “Playmode OFF” appears on the screen.
• You may also select a desired track using the Number
buttons at step 4.
Program Play
0:00:00Total
--
-- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Slide Show
You can select the display time between 5 seconds and
10 seconds.
1) Follow steps 1 and 2 in “Random Play”.
2) Select “Slide Show” using [Cursor K / L], then
press [ENTER].
3) Select the display time using [Cursor K / L],
then press [ENTER].
Note
• Large-size JPEG files take a few moments to be
displayed.
PlaybackUD.indd92PlaybackUD.indd92 2006/01/1116:29:102006/01/1116:29:10