Toshiba D-RW2SU - Settings for Still Mode

144
Function Setup
EN
Settings for Still Mode
Press [STOP C] if you are playing a disc.
Set the type of still image in pausing mode.
1
Follow steps 1 to 3 on page 141 to display the
Video setting menu.
2
Using [K / L], select “Still Mode”. Press
[ENTER].
3
Using [K / L], select a setting. Press [ENTER].
Your setting will be activated.
Auto : Optimun setting is selected.
Field : Flicker-free images are played back in pause playback mode.
Frame : Higher- resolution images are played back in pause playback
mode.
4
Press [SETUP] to exit.
Video
OFF
Progressive
Still Mode
Auto
Video-Still Mode
Auto
Field
Frame
Note
• Frame is one complete video image and made up of 2 fields (There are 30 frame per second of NTSC video).
Start
FunctionsetupUD.indd144FunctionsetupUD.indd144 2006/01/1116:30:142006/01/1116:30:14