10
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
PAPER FEEDING SYSTEM
10 - 23
[O] Drawer pickup clutch
(4) Remove 1 screw and take off the pickup
solenoid from the bracket.
Fig. 10-41
(1) Take off the main motor drive unit.
P.9-7 "[C] Main motor drive unit"
(2) Take off the pickup solenoid bracket.
P.10-22 "[N] Pickup solenoid (SOL1)"
(3) Remove 1 E-ring, and take off the drawer
pickup clutch.
Fig. 10-42
(4) Take off the cover-A, cover-B, spring and
flange.
Fig. 10-43
Pickup solenoid
Drawer pickup clutch
E-ring
Flange
Spring
Cover-A
Cover-B
Hook
To Next Page
Loading...
