EasyManuals Logo

Toshiba E-studio 2550c Troubleshooting Guide

Toshiba E-studio 2550c
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 21
1 TROUBLESHOOTING FOR THE HARDWARE
Paper misfeed in the bypass tray
Paper misfeed in the automatic duplexing unit
Be careful not to let your fingers be caught between the equipment and the duplexing unit cover or automatic
duplexing unit cover.
This could injure you.
1
Move the green paper holding lever toward the
outside.
The paper can now be removed.
2
Pull out the misfed paper in the bypass tray.
3
Place paper in the bypass tray again and then move
the green paper holding lever toward the inside.
If a sheet of paper is stained, folded or torn, replace it with a new one.
1
2
1
Open the automatic duplexing unit cover on the right.

Table of Contents

Other manuals for Toshiba E-studio 2550c

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba E-studio 2550c and is the answer not in the manual?

Toshiba E-studio 2550c Specifications

General IconGeneral
Max Print Resolution600 x 1200 dpi
Print TechnologyLaser
Print Speed25 ppm
Scan TypeColor
Copy Speed25 cpm
FunctionsPrint, Copy, Scan
Paper SizeA3, A4, A5, B4, B5
Duplex PrintingAutomatic
Network ConnectivityEthernet
Operating System CompatibilityWindows, Mac, Linux
WeightApproximately 73 kg

Related product manuals