Toshiba E-studio 2550c Troubleshooting Guide

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 23
1 TROUBLESHOOTING FOR THE HARDWARE
 Paper misfeed in the fuser unit
 Be careful not to let your fingers be caught between the equipment and the duplexing unit cover or automatic
duplexing unit cover.
This could injure you.
 Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the machine.
1
Open the automatic duplexing unit cover on the right.
2
Press down the two green fuser pressure release
levers until they stop.
3
Open the transport guide holding the green knob and
then release the misfed paper. Pull the misfed paper
up or down as shown in the illustrations depending
on the position of the paper.
Pulling it up
Pulling it down
3
2
1

Toshiba E-studio 2550c Specifications

General

Max Print Resolution	600 x 1200 dpi
Print Technology	Laser
Print Speed	25 ppm
Scan Type	Color
Copy Speed	25 cpm
Functions	Print, Copy, Scan
Paper Size	A3, A4, A5, B4, B5
Duplex Printing	Automatic
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux
Weight	Approximately 73 kg