EasyManuals Logo

Toshiba E-studio 2550c Troubleshooting Guide

Toshiba E-studio 2550c
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 37
Clearing a Staple Jam
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the procedure
below.
P.37 “Staple jam in the finisher”
P.41 “Staple jam in the Saddle Stitch unit”
Staple jam in the finisher
Inner Finisher
1
Lift up the control panel and then open the front cover
of the finisher.
2
While holding the green lever, move the finisher to the
left until it stops.
3
Open the Hole Punch Unit while pushing the green
lever.
4
Remove the staple cartridge.
2
1
2
1
2
1

Table of Contents

Other manuals for Toshiba E-studio 2550c

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba E-studio 2550c and is the answer not in the manual?

Toshiba E-studio 2550c Specifications

General IconGeneral
Max Print Resolution600 x 1200 dpi
Print TechnologyLaser
Print Speed25 ppm
Scan TypeColor
Copy Speed25 cpm
FunctionsPrint, Copy, Scan
Paper SizeA3, A4, A5, B4, B5
Duplex PrintingAutomatic
Network ConnectivityEthernet
Operating System CompatibilityWindows, Mac, Linux
WeightApproximately 73 kg

Related product manuals