Toshiba E-studio 2550c Troubleshooting Guide

1 TROUBLESHOOTING FOR THE HARDWARE
26 Clearing a Paper Misfeed
 Paper misfeed in the Bridge Kit
3
Close the Bridge Kit cover.
 Paper misfeed in the Inner Finisher and the Hole Punch Unit
1
Open the cover holding the handle of the Bridge Kit.
2
Remove the misfed paper inside the Bridge Unit.
If the misfed paper cannot be removed because the right side is
caught by the fuser unit, follow the steps on  P.23 “Paper misfeed
in the fuser unit”.
1
Lift up the control panel and then open the front cover
of the finisher.
2
While holding the green lever, move the finisher to the
left until it stops.
2
1
2
1

Toshiba E-studio 2550c Specifications

General

Max Print Resolution	600 x 1200 dpi
Print Technology	Laser
Print Speed	25 ppm
Scan Type	Color
Copy Speed	25 cpm
Functions	Print, Copy, Scan
Paper Size	A3, A4, A5, B4, B5
Duplex Printing	Automatic
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux
Weight	Approximately 73 kg