Toshiba E-studio 2550c Troubleshooting Guide

1 TROUBLESHOOTING FOR THE HARDWARE
34 Clearing a Paper Misfeed
7
Press the drawer button indicated in the message.
8
Press the paper size button corresponding to the paper placed in the drawer, and [OK].
9
Press the [USER FUNCTIONS] button to return to the basic menu.
10
Confirm that the paper size is correctly detected if you selected [AUTO (mm)] or [AUTO
(inch)] in step 8.
The detected paper size is indicated on the drawer button in the equipment status indication area on the left.
An incorrect paper size or “ ” indicates an unsuccessful detection. In this case, check if:
 There is too much space between the paper and the side and end guides of the drawer.
 You have selected [AUTO (inch)] even though A/B format paper has been placed.
 You have selected [AUTO (mm)] even though LT format paper has been placed.
11
Try copying or printing again.

Toshiba E-studio 2550c Specifications

General

Max Print Resolution	600 x 1200 dpi
Print Technology	Laser
Print Speed	25 ppm
Scan Type	Color
Copy Speed	25 cpm
Functions	Print, Copy, Scan
Paper Size	A3, A4, A5, B4, B5
Duplex Printing	Automatic
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux
Weight	Approximately 73 kg