Toshiba E-STUDIO 351C - Page 88

86
3.SETTING ITEMS (USER)
1.SETTING GENERAL FUNCTIONS (Cont.)
3
4
Press the [CALIBRATION] button.
• The CALIBRATION menu is displayed.
5
Press the [PRINT] button.
6
Press the desired resolution button of the emulation that will be
based on the calibration.
• Press the [600 x 600] button in the “PS3” menu to calibrate for the 600 dpi PostScript print job.
• Press the [1200 x 600] button in the “PS3” menu to calibrate for the 1200 dpi PostScript print job.
• Press the [600 x 600] button in the “PCL” menu to calibrate based on the 600 dpi PCL output image.
• Press the [1200 x 600] button in the “PCL” menu to calibrate based on the 1200 dpi PCL output image.
The [1200 x 600] buttons are displayed only when additional memory is installed on this equipment.