3 Installing Client Software for Macintosh
164 Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x
4
Click [Add].
y The Determining Installable Options window appears.
5
Click [Configure...] while the windows is displayed.
y The Installable Options window appears.
6
Set the following options.
y Finisher
Not Installed — Select this if a finisher is not installed.
Single-Position Stapler — Select this when the Hanging Finisher is installed.
Multi-Position Stapler — Select this when the Finisher or Saddle Stitch Finisher is
installed.
Multi-Position Stapler and Hole Punch — Select this when the Finisher or Saddle
Stitch Finisher and Hole Punch unit are installed.
y Drawers
Not Installed — Select this when no optional drawer is installed.
Drawer 3 — Select this when the drawer 3 is installed.
Drawer 3 and 4 — Select this when the drawer 3 and 4 are installed.
LCF — Select this when the LCF is installed.
y LCF is not available for some countries or regions.
y The finisher options such as stapling and hole punching can be selected even if you
select “Not Installed” for the Finisher option. If you select the finisher options for print-
ing but the finisher is not installed, finisher settings will be ignored and perform print-
ing correctly.
7
Click [Continue].
y The printer is added to the Printer List.
To Next Page
Loading...
