Toshiba E-STUDIO 351C - Configuring the Printer on Mac os X 10.2.4 to Mac os X 10.3.X

Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x 169
y Drawers
Not Installed — Select this when no optional drawer is installed.
Drawer 3 — Select this when the drawer 3 is installed.
Drawer 3 and 4 — Select this when the drawer 3 and 4 are installed.
LCF — Select this when the LCF is installed.
y LCF is not available for some countries or regions.
y The finisher options such as stapling and hole punching can be selected even if you
select “Not Installed” for the Finisher option. If you select the finisher options for print-
ing but the finisher is not installed, finisher settings will be ignored and perform print-
ing correctly.
6
Click [Continue].
y The printer is added to the Printer List.
Configuring the Printer on Mac OS X 10.2.4 to Mac OS X 10.3.x
After you copy the PPD file to the library folder in the System Folder, you can configure the
printer.
This equipment supports the following Macintosh Printing Services: LPR Printing, AppleTalk
Printing, IPP Printing, and Bonjour Printing.
y LPR Printing
When this equipment and your computer are connected over TCP/IP network, you can
enable LPR printing from Macintosh computer.
y AppleTalk Printing
When this equipment and your computer are connected over AppleTalk network, you can
enable AppleTalk printing from Macintosh computer.
y IPP Printing
When this equipment and your computer are connected over TCP/IP network, you can
enable IPP printing from Macintosh computer.
y Bonjour Printing
When this equipment and your computer are connected over TCP/IP network, you can
enable Bonjour printing from Macintosh computer.