Before Using the Printer Driver 221
Configuring the Options Automatically
The following describes an instruction on Windows XP. The procedure is the same when other
versions of Windows are used.
Setting the configuration tab using SNMP communication
y You must log into Windows as a user who has the “Administrators” or “Power Users” privi-
lege when using Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003.
y When using Windows Vista
In order to open the Fonts tab, right-click the printer icon and select [Run as administrator].
Then enter the administrator's password of the client computer to operate with an adminis-
trator's privilege.
1
Select the printer driver in the Printers and Faxes folder. Then click
[File] and select [Properties].
y When you are operating under Windows 98/Me/NT 4.0/2000/Vista, open the Printers
folder to access the printer driver.
y When using Windows Vista, click [Start], select [Control Panel], and click [Printer]
under [Hardware and Sound] to open the Printers folder.
y The printer driver properties dialog box appears.
To Next Page
Loading...
