5 Printing from Windows
220 Before Using the Printer Driver
3
Click [Drawer Settings].
y The Drawer Settings dialog box appears.
4
Set the following options and click [OK].
Drawer 1 — Select the paper size and paper type of paper that is loaded in the 1st
Drawer.
Drawer 2 — Select the paper size and paper type of paper that is loaded in the 2nd
Drawer.
Drawer 3 — Select the paper size and paper type of paper that is loaded in the 3rd
Drawer when it is installed.
Drawer 4 — Select the paper size and paper type of paper that is loaded in the 4th
Drawer when it is installed.
LCF — Select the paper size and paper type of paper that is loaded in the LCF when it is
installed.
Bypass Tray — Select the paper type of paper that is loaded in the Bypass Tray.
Override Application Paper Settings — Check this to use the paper source setting in
the printer driver rather than the application setting.
5
Click [Apply] and [OK] to save settings.
To Next Page
Loading...
