Printing from an Application 347
Distinguish Thin Lines
The thin line limit mode can be set using the following option.
Example: The command to set the thin line limit mode is
“lp -o thinlinelimit=on filename”.
Do not Print Blank Pages
The Blank page mode can be selected using the following option.
Toner Save
The toner save mode can be set using the following option.
Example: The command to set the toner save mode is “lp -o tonersave=on filename”.
Option Value
Alternate
Value
Description
thinlinelimit=on ON Set the thin line limit mode.
thinlinelimit=off OFF Cancel the thin line limit mode.
Option Value
Alternate
Value
Description
blankpage=0 Set the blank page mode (disable Do not Print Blank
Pages).
blankpage=1 Cancel the blank page mode (enable Do not Print Blank
Pages).
Option Value
Alternate
Value
Description
tonersave=on ON Set the toner save mode.
tonersave=off OFF Cancel the toner save mode.
To Next Page
Loading...
