7 Printing from UNIX
348 Printing from an Application
Booklet Modes
The booklet mode can be selected using the following options.
In a job, if this value is LT, and in PDL too the data is for LT paper size, this will result in a scaled
booklet on Letter paper. In a job, if this value is A3, and in PDL the data is for A4 paper size, this
will result in a tiled booklet on A3 paper.
When the Booklet Mode options is selected, the paper size is automatically set to the same size
as for Booklet Mode. This function is only available for A3, A4, B4, Letter and Ledger paper
sizes.
If booklet mode is selected, then duplexing is also selected automatically (sduplex). Setting
duplexing separately can override the booklet mode setting for duplexing.
Example: The command to select the letter size paper for booklet printing mode is
“lp –o booklet=letter filename”.
Option Value
Alternate
Value
Description
booklet=letter lt
LT
Select letter size paper for booklet printing mode.
booklet=A4 a4 Select A4 size paper for booklet printing mode.
booklet=legal lg
LG
Select legal size paper for booklet printing mode.
booklet=
statement
st
ST
Select statement size paper for booklet printing mode.
booklet=ledger ld
LD
Select ledger size paper for booklet printing mode.
booklet=folio folio-japan Select folio size paper for booklet printing mode.
booklet=A3 a3 Select A3 size paper for booklet printing mode.
booklet=A5 a5 Select A5 size paper for booklet printing mode.
booklet=B4 b4
B4-JIS
b4-jis
Select JIS B4 size paper for booklet printing mode.
booklet=B5 b5
B5-JIS
b5-jis
Select JIS B5 size paper for booklet printing mode.
booklet=
computer
co
CO
Select computer size paper for booklet printing mode.
booklet=legal13 lg13
LG13
Select legal-13 size paper for booklet printing mode.
booklet=SQ85 sq85
letter-square
Select 8.5 inch square size paper for booklet printing
mode.
booklet=8K 8k Select 8K size paper for booklet printing mode.
booklet=16K 16k Select 16K size paper for booklet printing mode.
To Next Page
Loading...
