4 Installing Client Software for UNIX
210 Setting Up the CUPS
Options Installed
Printing Modes
Printing Modes DC
Private Document Password
Option Value Alternative Value Description
Drawers Not Installed
Drawer 3
Drawer 3 and 4
LCF
Select the combination among
Drawer 3, Drawer 4, and LCF.
Finisher Not Installed
Single Position Stapler
Multi-Position Stapler
Multi-Position Stapler and Hole Punch
Select whether the optional finisher is
installed or not.
[Continue] button Determines the selected items.
Option Value Alternative Value Description
Department Code Disabled
Enabled
Select whether to use the department
codes for printing or not.
When this equipment is managed
under the department codes, this
option should be enabled.
Distinguish Thin Lines Off
, On Select whether to distinguish thin
lines or not.
Do not Print Blank
Pages
Off
, On Do not Print Blank Pages
Print Mode Normal
Proof
Private - Password
Select the print mode.
[Continue] button Determines the selected items.
Option Value Alternative Value Description
Department Code (DC) -
Digit 1 to Digit 5
0 to 9 Specify the 5-digit department code
when “Department Code” of “Printing
Modes” is enabled.
For the appropriate department code,
check with your system administrator.
[Continue] button Determines the selected items.
Option Value Alternative Value Description
Password - Digit 1 to
Digit 5
0 to 9 Specify the 5-digit document pass-
word when “Private - Password” is
selected for “Print Modes”.
[Continue] button Determines the selected items.
To Next Page
Loading...
