Setting Up the CUPS 209
Finishing
General
Option Value Alternative Value Description
Destination Inner Tray
Tray 1
Tray 2
Select the destination.
Hole Punch Off
Long Edge Punch without rotation
Short Edge Punch without rotation
Long Edge Punch with 180 degree rotation
Short Edge Punch with 180 degree rotation
Select whether or not a print job is
hole punched.
Stapling Off
Upper Left (Portrait)/Upper Right (Landscape)
Middle Left (Portrait)/Middle Top (Landscape)
Lower Left (Portrait)/Upper Left (Landscape)/
Upper Right (Portrait)/Lower Right (Land-
scape)
Middle Right (Portrait)/Middle Bottom (Land-
scape)
Lower Right (Portrait)/Lower Left (Landscape)
Middle Top (Portrait)/Middle Right (Landscape)
Middle Bottom (Portrait)/Middle Left (Land-
scape)
whether a print job is stapled.
“Saddle Stitch (Portrait)/Saddle
Stitch (Landscape)” can be
selected only when the Saddle
Stitch Finisher is installed.
[Continue] button Determines the selected items.
Option Value Alternative Value Description
Collate Yes, No Select whether exited sheets are
collated or not.
Duplex 1-Sided
1-sided printing
2-Sided, No Tumble (Long-Edge Binding) 2-sided printing (Long-edge bind-
ing)
2-Sided, Tumble
(Short-Edge Binding)
2-sided printing (Short-edge bind-
ing)
Media Size A3, A4, A5, A6, B4, B5, Ledger, Legal, Letter
,
Statement, Folio, Computer, 13” LG, 8.5” SQ,
(12x18”), A3-Wide, 8K, 16K
Select the paper size.
Media Source Auto
(Default)
Drawer 1
Drawer 2
LCF
Drawer 3
Drawer 4
Bypass Tray
Plain
Thick 1
Thick 2
Thick 3
Transparency
Select the paper source.
[Continue] button Determines the selected items.
To Next Page
Loading...
