5 Printing from Windows
222 Before Using the Printer Driver
2
Display the [Configuration] tab, check on “Enable SNMP Communi-
cation”, and click [Update Now].
y The printer driver starts communicating with system and obtains option settings auto-
matically.
If the connection to the equipment has not been configured correctly, the message “The
address of your printer could not be located. Would you like to find it?” will be displayed.
If it is displayed, click [Yes] and search for the equipment using the TopAccessDocMon
Local Discovery dialog box. After searching the equipment, SNMP communication will
be enabled.
3
If you want to update option settings automatically when the [Con-
figuration] tab is opened, select on “Update Automatically”.
To Next Page
Loading...
