Toshiba E-STUDIO 351C - Page 198

4 Installing Client Software for UNIX
196 Setting Up the UNIX Filters
8
Enter the following command:
cp /opt/toshiba/tap/model/net_estcolor \
/opt/toshiba/tap/interface/<queue name>
9
Enter the following command:
/opt/toshiba/tap/bin/modPrintcap \
-a <queue name> <IP address>
10
Enter the following command:
ls /opt/toshiba/tap/bin/flag_<queue name>
11
If the above file exists, enter the following command.
/opt/toshiba/tap/bin/printconf_import \
-a <queue name> IP_ADDRESS \
rm /opt/toshiba/tap/bin/flag_<queue name>
12
Restart your lpd.
Creating a print queue manually on OpenUNIX
1
Log on to the root account.
2
Open your Linux/UNIX editor.
3
Create the following file.
/etc/lp/interfaces/<queue name>.conf
4
Add a line as below in the <queue name>.conf.
dest=<IP address>
5
Save the file.
6
Enter the following command:
chmod +x <queue name>.conf
7
Enter the following command:
chown lp:lp <queue name>.conf
8
Enter the following command:
lpadmin -p <queue name> -v /dev/null -I any \
-i /usr/lib/lp/model/net_estcolor
9
Enter the following command:
accept <queue name>
10
Enter the following command:
enable <queue name>