Printing with Extended Print Functionality 285
Creating or editing a watermark
1
Click [Add] to create new watermark, or select a watermark that you
want to edit and click [Edit] to edit a watermark.
y The Watermark dialog box appears.
2
Enter the watermark text in the “Caption” field.
y You can enter up to 63 characters for the “Caption” field. However, if too many char-
acters are entered, the watermark may not be printed correctly.
3
Select a font for the watermark at the “Font Name” drop down
menu.
4
Select a font style for the watermark at the “Style” drop down
menu.
5
Enter the font size in the “Font Size” field.
y You can enter any integer between 6 to 300pt in units of 1pt.
6
Select a color for the watermark at the “Color” drop down menu.
y If your preferred color is not listed in the drop down menu, click [Browse...] to display
the color palette and add your color.
y The “Color” drop down menu is not available for the PCL6 printer driver.
y When “Black and White” is selected at the “Color” drop down menu on the Basic tab,
the “Color” drop down menu is not available.
7
To rotate the watermark, enter the degrees in the “Angle” field.
y You can enter from -90 degrees to 90 degrees in units of 1 degree in the “Angle” field.
y You can also set the angle using the scroll bar.
To Next Page
Loading...
