2 Installing Client Software for Windows
60 Installing Client Software for USB Printing
11
Click [Finish].
12
The installation is completed.
Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.
P.218 “Before Using the Printer Driver”
Windows Me
Installing the printer driver for USB printing by Plug and Play
1
Power on this equipment and your computer.
2
Insert the Client Utilities CD-ROM into the CD-ROM drive.
y When inserting the Client Utilities CD-ROM, the installer may automatically start.
Click [Exit] to exit the installer and continue the operation.
3
Connect the USB cable to this equipment and your computer.
y The Add New Hardware Wizard dialog box appears.
To Next Page
Loading...
