Installing Client Software for SMB Printing 93
When the equipment is not automatically found in the network, the “Message” dialog box
appears. In that case, follow the procedure below to select the network queue manually.
1. On the “Message” dialog box that appears, click [Continue].
2. Click [Browse] for the network path or queue name.
- Finding devices may take long depending on your OS or network environment.
3. The Browse for Folder dialog box appears. Locate this equipment in your network,
select the “print” queue, and click [OK].
- Do not select “pcl6” or “ps3” queue. These queues only accept the print job in
each emulation. If you install several printer drivers and specify one of these
queues, the print job may not be printed properly due to mismatch of the emula-
tions between the print job and queue.
To Next Page
Loading...
