1 TROUBLESHOOTING FOR THE HARDWARE
42 Clearing a Paper Misfeed
4
Press [YES] when “Cancel print job?” appears.
The print job is canceled.
If you do not want to cancel the print job
To restart the job without canceling it, replace the paper in the drawer with that corresponding to the
size set in the equipment after the paper misfeed is cleared. Then if you press [NO] in step 4, the job
can be restarted. In this case, it is not necessary to follow step 5 and later.
6
Press the [USER] tab to enter the [USER] menu and press [DRAWER].
5
Press the [USER FUNCTIONS] button on the control
panel.
To Next Page
Loading...
Need help?
General
