1 TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 61
Refilling With Staples
Refill with staples according to the following procedures when the staples in the stapler of the finisher and
saddle stitch unit run out.
P.61 “Refilling finisher staples”
P.64 “Refilling Saddle Stitch unit staples”
Refilling finisher staples
Finisher / Saddle Stitch Finisher
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
3
Take the empty staple case out of the staple cartridge.
Pull up the empty staple case while pushing both sides as
shown in the figure.
4
Fit a new staple case on the staple cartridge.
Push the staple case hook into the staple cartridge socket until
you hear a click.
2
1
1
To Next Page
Loading...
Need help?
General
