9
1
6
Specify following items as you required.
- TX TYPE — This sets the type of the fax transmission mode.
Press the [MEMORY TX] button to select the memory
transmission mode or the [DIRECT TX] button to select the direct
transmission mode.
- ECM — Select whether enabling or disabling the ECM (Error
Correction Mode) to automatically resend any portion of the
document affected by phone line noise or distortion. Press the
[ON] button to enable the ECM, or the [OFF] button to disable the
ECM.
- QUALITY TX — Select whether a document is sent in the Quality
TX mode. This feature allows to send a document at a slower
speed than a normal so that the transmission will be less affected
by line condition. Press the [ON] button to enable the Quality TX,
or [OFF] button to disable the Quality TX.
- LINE SELECT — Select the line to be used for the fax
transmission. Press the [LINE1] button to use the Line 1, or
[LINE2] button to use Line 2.
- [SUB] — Enter the mailbox number if you want to send originals
to the mailbox in the remote fax.
- [SID] — Enter the password to input a document into the mailbox
in the remote facsimile.
- [SEP] — Enter the mailbox number if you want to retrieve a
document from the mailbox in the remote fax.
- [PWD] — Enter the password to retrieve a document from the
mailbox in the remote facsimile.
When you press the [SUB], [SID], [SEP], and [PWD] buttons, the
input screen is displayed. Enter the value using the keyboard and
digital keys, and press the [ENTER] button to set the entry.
7
Press the [ENTER] button to save option
settings.
8
Press the [ENTER] button to register the
contact.
To Next Page
Loading...
