Toshiba e-STUDIO 450 - Setting Fax Functions; Setting the Terminal ID

110
4.SETTING ITEMS (ADMIN)
4
5. SETTING FAX FUNCTIONS
Setting the Terminal ID
The Terminal ID settings are available only when the optional Fax unit is installed.
Once programmed, Terminal ID information will be printed on the leading edge of transmitted or received
documents if the TTI and RIT are enabled.
- ID information is sent and printed about 5 mm from the top edge of the original.
- In compliance with FCC regulations, your company’s name, facsimile telephone number and date & time
are added at the top of all transmitted documents. This feature enables remote parties to easily identify
your documents and the time of transmission.
1
Press the [FAX] button in the ADMIN
menu.
- The FAX menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
 Page 78
2
Press the [TERMINAL ID] button.
- The TERMINAL ID screen is displayed.
3
Specify following items as required.
- [ID NAME] — Press this to enter the terminal ID of this
equipment.
- [FAX NUMBER] — Press this to enter the fax number of this
equipment.
- [LINE2 NUMBER] — Press this to enter the 2 line fax number of
this equipment if the Line2 board is installed. This is not displayed
when the Line2 board is not installed.