54
2.MANAGING COUNTERS (COUNTER MENU)
4.MANAGING DEPARTMENT CODE (Cont.)
2
Resetting the Counter of Each Department
The function allows you to reset the counter of specific department code only.
1
In the DEPT. MANAGEMENT menu, press
the [DEPARTMENT REGISTRATION]
button.
- The DEPARTMENT CODE screen is displayed.
For the procedure to display the screen on the right, see "Logging
On As Administrator". Page 43
2
Press the department button that you
want to reset the counter and press the
[RESET COUNTERS] button.
- The clear confirmation screen is displayed.
If the touch panel does not display the department code that you
want to clear the counter, press the [Next] button to display the next
screen.
3
Press the [YES] button to clear the
counter of the department code, or [NO]
button to cancel clearing the counter.
- When you press the [YES] button, the counter of the department
code is cleared.
To Next Page
Loading...
