Toshiba e-STUDIO 450 - Setting Copy Functions

65
3
2. SETTING COPY FUNCTIONS
You can change the initial setting (default setting) of copy job.
1
Press the [USER FUNCTIONS] button on
the control panel to enter the User
Functions menu.
2
Press the [USER] button, and then press
the [COPY] button on the touch panel.
- The COPY screen is displayed.
3
In the “EXPOSURE MODE” option, press
the desired mode button.
4
In the “ORIGINAL MODE” option, press
the desired mode button.
5
In the “IMAGE DIRECTION” option, press
the desired mode button.
- When this is enabled, the portrait originals that are placed in R
direction can be detected as portrait original and perform the
duplex copy correctly. This is usually enabled only when you
want to perform duplex copy from the large size of portrait
originals such as A3 or LD-size portrait originals.
6
In the “BYPASS FEED” option, press the
desired paper type button.
For more information about the paper type, please see the
Operator’s Manual For Basic Functions.
7
Press the [Next] button to display the next
screen.