125
4
8. SETTING INTERNET FAX FUNCTIONS
Setting the Internet Fax Message Properties
You can configure the message properties of Internet Faxes that will be sent by Internet Fax transmission.
The [INTERNET FAX] button in the [ADMIN] menu will be available only when the Printer Kit and Scanner
Upgrade Kit are installed, or when the Printer/Scanner Kit is installed.
1
Press the [INTERNET FAX] button in the
ADMIN menu.
- The INTERNET FAX screen is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 78
2
Press each button to enter the Internet
Fax properties.
- [FROM ADDRESS] — Press this to enter the E-mail address of
this equipment.
- [FROM NAME] — Press this to enter the identification name of
this equipment.
- [BODY] — Press this to enter the body message.
You must enter the [FROM ADDRESS] button to enable Internet
Fax.
When you press each button, the input screen is displayed. Enter
the value using the keyboard and digital keys, and press the
[ENTER] button to set the entry.
3
Press the [ENTER] button.
To Next Page
Loading...
