Toshiba e-STUDIO 450 - Page 148

146
5.APPENDIX
1.LIST PRINT FORMAT (Cont.)
5
SCAN
Function Description User
ROTATION Shows the default rotation mode. YES
SINGLE/2-SIDED SCAN Shows the default 2-sided scan mode. YES
RESOLUTION Shows the resolution for scans. YES
ORIGINAL MODE Shows the default original mode for scans. YES
EXPOSURE Shows the default exposure setting for
scans.
YES
FAX
Function Description User
FAX ROM VERSION Shows the ROM version of the Fax unit. YES
RESOLUTION Shows the default resolution setting for a fax/
Internet Fax transmission.
YES
ORIGINAL MODE Shows the default original mode for a fax/
Internet Fax transmission.
YES
EXPOSURE Shows the default exposure setting for a fax/
Internet Fax transmission.
YES
TX TYPE
*1
Shows the default transmission type. YES
RTI Shows whether the RTI is enabled or
disabled.
YES
ECM
*1
Shows whether the ECM is enabled or
disabled.
YES
INITIAL SETUP - MONITOR VOLUME
*1
Shows the monitor volume setting. NO
INITIAL SETUP - COMPLETION TONE
VOLUME
*1
Shows the complete volume setting. NO
INITIAL SETUP - RX MODE
*1
Shows the default RX mode. NO
INITIAL SETUP - DIAL TYPE
*1
Shows the dial type of the line 1. NO
INITIAL SETUP - DIAL TYPE (LINE2)
*2
Shows the dial type of the line2. NO
LINE-2 MODE
*2
Shows the line2 mode. NO
LINE-2 MODE - START
*2
Shows the start time to use the Line2 for
receptions only. This applies only when “RX
ONLY (TIMER)” is set to the LINE-2 MODE.
NO
LINE-2 MODE - END
*2
Shows the end time to finish using the Line2
for receptions only. This applies only when
“RX ONLY (TIMER)” is set to the LINE-2
MODE.
NO