Toshiba e-STUDIO 450 - Hole Punch Mode (Optional); Using the Hole Punch Unit

84
4.SETTING ITEMS (ADMIN)
2.SETTING GENERAL FUNCTIONS (Cont.)
4
4
Enter the new administrator password in
the “New Password” field using the digital
keys. After entering the password, press
the [SET] button to set the entry.
- If you enter the password, asterisks (*) appear in the “New
Password” field.
- If you want to clear the password to retype it, press the [CLEAR]
button on the Control Panel.
- After pressing the [SET] button, the “Retype New Password” field
is highlighted.
- You cannot leave this field blank to set no administrator
password. You must set the administrator password.
- If you want to return to the “Old Password” field to retype it, press
the [RESET] button.
5
Enter the new administrator password
again in the “Retype New Password” field
using the digital keys. After entering the
password, press the [SET] button to set
the entry.
- If you enter the password, asterisks (*) appear in the “Retype New
Password” field.
- If you want to clear the password to retype it, press the [CLEAR]
button on the Control Panel.
If you want to return to the “Old Password” or “New Password” field
to retype it, press the [RESET] button.
6
Press the [ENTER] button at the bottom of
the touch panel.