88
4.SETTING ITEMS (ADMIN)
2.SETTING GENERAL FUNCTIONS (Cont.)
4
4
Check the settings on the display, and if
corrections are necessary, press the
[CHANGE] button.
- If no correction is needed, press the [ENTER] button and
complete the operation.
5
Press the [<-Sun] or [Sat->] buttons to
switch the days of the week. Then in the
“ON” field, enter the time that the device
will automatically turn on the power using
the digital keys and press the [SET]
button to set the entry.
- If you want to clear entered time to retype it, press the [CLEAR]
button on the Control Panel.
- After pressing the [SET] button, the “OFF” field will be highlighted.
6
In the “OFF” field, enter the time that the
device will automatically turn off the
power using the digital keys and press the
[SET] button to set the entry.
- If you want to clear entered time to retype it, press the [CLEAR]
button on the Control Panel.
- If you want to return to the “OFF” field to retype it, press the
[RESET] button.
- To disable the Weekly Timer, enter the same times in both “ON”
and “OFF” field.
7
Press the [ENTER] button at the bottom of
the touch panel.