1 RESTRICTIONS
TopAccess USER Mode 11
TopAccess USER Mode
The e-STUDIO4520C series machine with the GA-1211 controller attached or e-STUDIO6530C series machine with the
GA-1310 controller attached has several restrictions in the following TopAccess USER mode operations:
P.11 “Launching TopAccess”
P.11 “TopAccess top page”
P.12 “Registering from TopAccess”
Launching TopAccess
The following methods for launching TopAccess cannot be used when the controller is connected to the equipment:
y Launching TopAccess by using the TopAccessDocMon link
y Launching TopAccess from Network Map (Windows Vista)
The operation for launching TopAccess differs depending on the equipment with or without the controller. For
instructions on how to launch TopAccess on the equipment with the controller, see the following section:
P.35 “Launching TopAccess from the WebTools home page”
TopAccess top page
The following link for downloading the client software cannot be used when the controller is connected to the equipment:
y The [Install Software] link
e-STUDIO4520C series/e-STUDIO6530C series
All the screenshots in this manual are examples from Windows Vista.
To Next Page
Loading...
Need help?
General
