Toshiba e-STUDIO 520 - How to User Remote Scan Driver; When You Are Running the First Time

8. Remote Scan
Scanning Guide — How to User Remote Scan Driver 117
How to User Remote Scan Driver
You can use Remote Scan driver to import the scanned images into your computer with
eCopy ShareScan OP 3.0. For the instructions on how to import the scanned images
using eCopy ShareScan OP 3.0, please refer to the documentation of the eCopy
ShareScan OP 3.0.
When you perform importing scanned images using the Remote Scan driver, the
TopAccessDocMon Local Discovery dialog box may appear, if the connection to the
equipment has not been configured. When the TopAccessDocMon Local Discovery dia-
log box appears, please see the following section.
When You Are Running the First Time
When you access the Remote Scan driver the first time, the TopAccessDocMon Local
Discovery dialog box appears. In this case, search the equipment in your network and
configure the connection.
Discovering the device automatically
1. In the TopAccessDocMon Local Discovery dialog box, click
[Start Discovery] to begin the process.
• It locates all the compatible devices in your network.
2. When the process is completed, found devices are listed in
the list.
SUPPLEMENT: If the process continues for a long time, it is because too many network clients are on
the network. In that case, you can configure the discovery using the [Advanced] button.
 P.120 "Configuring Discovery Settings"