1. Overview
12 Scanning Guide — How to Perform Scan Operations
How to Perform Scan Operations
Users can scan originals not only by selecting one of the scan modes, but also by com-
bining two scan modes at a single operation.
The following procedures describe about the basic instructions on how to perform the
scan operations.
P.12 "Scanning Procedure for Single Agent"
P.14 "Scanning Procedure for Multiple Agents"
SUPPLEMENTS: • Users can use a template to perform a scan operation as well. For more information
about a template, see the following section.
P.63 "Using Template"
• When the Scanner Kit or Printer/Scanner Kit is installed, users can perform Copy &
File, which enables users to copy the originals as well as storing the originals as a
file. For more information about Copy & File, see the following section.
P.81 "Copy & File"
Scanning Procedure for Single Agent
1. Place the original(s).
• For instruction about placing the originals, see Operator’s Manual for
Basic Function.
2. Press the [SCAN] button on the control panel to enter the
scan menu.
• The basic scan menu is displayed.
To Next Page
Loading...
