4. Scan to E-mail
50 Scanning Guide — How to Perform Scan to E-mail
15. If the “To continue, place document on glass. And press
Scan!” message is displayed, place another original on glass
and press [SCAN!] to scan another original, or press the
[JOB FINISH] button to finish scanning.
• When the original is set on the Automatic Document Feeder, this screen is
not displayed. However, this screen is displayed when you press the [CON-
TINUE] button during scanning the originals.
• If you want to cancel the storage of the scanned data, press the [JOB CAN-
CEL] button.
• You can change the setting of the original type and scanning conditions,
using the [EDIT] button before pressing the [SCAN!] button.
Specifying Destinations
When pressing the [E-MAIL TO] button in the SCAN TO E-MAIL screen, the ADDRESS
BOOK screen is displayed.
You can specify E-mail addresses for Scan to E-mail by following methods:
P.50 "Entering an E-mail address manually"
P.51 "Selecting from address book"
P.52 "Searching with ID number for a contact"
P.53 "Searching with search strings from address book"
P.55 "Searching with search strings from LDAP server"
P.57 "Selecting from groups"
P.58 "Searching with ID number of a group"
P.59 "Searching with group name"
Entering an E-mail address manually
1. Press the [E-MAIL ADDRESS] button.
• The letter entry screen is displayed.
To Next Page
Loading...
