5. Using Template
64 Scanning Guide — Scanning Using Template
Scanning Using Template
Users can also use a template to operate scanning on this equipment.
When the Scanner Kit or Printer/Scanner Kit is installed, it enables users to register
templates for scanning operations.
Once registering a template, users can operate the scanning operation quickly without
setting the scanning conditions.
NOTE: Before scanning using a template, users must register a template for scan operations.
For instructions on how to register a template, see the following section.
P.72 "Registering Scan Template"
SUPPLEMENT: The templates that the Scan to E-mail agent is set will be available after user authenti-
cates the access rights for the Scan to E-mail operation. For instructions on how to
operate scan using a template, see the following section.
P.67 "Using Scan to E-mail template when User Authentication for Scan to E-mail is
enabled"
Scan Procedure using a template
1. Place the original(s).
• For instruction about placing the originals, see Operator’s Manual for
Basic Function.
2. Press the [TEMAPLATE] button on the control panel to enter
the template menu.
• The screen to select a template group is displayed.
To Next Page
Loading...
