8. Remote Scan
Scanning Guide — How to User Remote Scan Driver 119
2. Enter each item to specify the network address of the device
and click [OK].
IP Address — Enter the IP address of the printer.
IPX Address — This is disabled because the Remote Scan driver does not
support the IPX/SPX connection.
Name — Enter the printer name.
Location — Enter the location of the printer.
NOTE: You must enter “Name” and “IP Address”.
3. The entered printer is added in the list. Select the printers
that you want to monitor from the list and click [OK].
• You are connected to the selected device.
To Next Page
Loading...
