1. Overview
Scanning Guide — How to Perform Scan Operations 17
7. If the “To continue, place document on glass. And press
Scan!” message is displayed, place another original on glass
and press [SCAN!] to scan another original, or press the
[JOB FINISH] button to finish scanning.
• When the original is set on the Automatic Document Feeder, this screen is
not displayed. However, this screen is displayed when you press the [CON-
TINUE] button during scanning the originals.
• If you want to cancel the storage of the scanned data, press the [JOB CAN-
CEL] button.
• You can change the setting of the original type and scanning conditions,
using the [EDIT] button before pressing the [SCAN!] button.
To Next Page
Loading...
